OPTIONS

Pallet changer and Machine Enclosure
A 4-6 station pallet changer will increase the flexibility of the machining center and increase available cutting time. While
the machine is cutting on one pallet, a fresh part can be loaded on the second pallet. The third pallet can be in the middle
of a new part setup and the fourth ready to run when the first pallet is finished. Additional automation is available with the
pallet changer. Using M-codes in the part program you can pick your pallet and or run all four pallets before requiring any
operator intervention to load more parts. Using macros you can also customize how pallets and part programs are
selected and cycled automatically. No machine should be without one. (Sample enclosure shown)

76 Tool Chain
The extended tool chain adds in the flexibility in machining complicated jobs or adding tool redundancy for extended production runs. The 76 tool option allows
for a full complement of machining operations on a multi pallet machine. Extra tools allow for fewer setups between jobs saving time and adding to profitability.

Chip Conveyors
One of the most important safety and maintenance tips is to keep the machine clean. With a chip conveyor under the machine,
the chips are automatically removed as they are cut. This option comes with control buttons located next to the operator
station for easy operation during machining. Ask about a programmable chip conveyor for production jobs that need the chip
conveyor to cycle on and off automatically.

Additional rotary table options
720 Position / 1/2 degree index B Axis table, Contouring Axis, or 5th Axis.

Probing Ready, Special Tooling and On fixture Tool Storage
Probing can simplify machine set up and calibration. The combination of Macro programming
and a probe will allow extreme flexibility for; set-up, part checking, program selection, broken
tool detection, setting offsets, and more. Adding a right angle tool to the machine's
tool magazine, the machine is able to work on more sides of a part and even drill and tap holes.
Extreme tooling can be accommodated on part fixtures and retrieved via the CNC part program.

Custom Stations and Duplex Mills
Each machine can be customized to the customer's needs. For example a milling station can be added to the end of
the X travel for simplified part processing. Duplex Mills, for some jobs two spindle are better than one. For custom
stations or duplex mills contact us.

Other Options
Special request can be add to the machine to fit a special
products or process. For example; a spacer between the column and the
base to facilitate the rotation of and cutting on the end of a longer part on the table.

Contact us at sales@msmsi.com 517.546.1170